ETESIA Attila 51 Pedestrian Brushcutter
Etesia has launched a new pedestrian brushcutter – the Attila 51 for taming rough grass areas
With built-in rugged reliability as standard, the new Etesia AD51 brushcutter has been designed to work in the toughest of conditions. This powerful workhorse effectively deals with clearing vegetation from a wide variety of sites – long grass, weeds, bracken and brambles on woodland paths or orchards. Ease of operation and manoeuvrability ensure total efficiency and high output.
Fitted with a powerful Briggs & Stratton 750 Series 4 stroke DOV 6HP engine and an integrated differential lock with over-sized rear wheels gives a good grip on uneven ground, especially on slopes of up to 38%. Cutting height adjustment is from 50-100mm.
Off-centred blade for cutting without clogging and a blade disengagement facility gives users a theoretical output of 2800 m²/h. Highly manoeuvrable thanks to the hydraulic transmission, three forward speeds and one reverse speed and the differential lock with latch ensures no continuous holding for greater safety and convenience. Full folding handles allows for easy transportation from site to site and storage.
High grass mowing and brush cutting
Integrated differential lock gives a good grip on uneven ground, especially on slopes. : slopes < 20° or 38 % Over-sized rear wheels with semi agricultural tyres, give a good grip. Off-centred blade for cutting without clogging. Blade disengagement facility Theoretical output 2800 m²/h Exclusive hydraulic transmission Highly manoeuvrable thanks to the hydraulic transmission, three forward speeds and one reverse speed and the differential lock. Differential lock control with latch; no continuous holding for more safety and convenience. Unparalleled drive smoothness due to the precision of the hydraulic output that is regulated according to the pressure applied on the traction control. Ergonomic and safe speed control making gear changes easier for incomparable manoeuvrability.
Reverse/forward change, with no declutching. Individual cutting height adjustment from 50 – 110 mm.
High-endurance hydraulic transmission fitted with a very rugged steel housing with lateral embossing for more rigidity and a Kawasaki FC180V OHV engine ensure this mower will outperform anything else on the market.
A more in-depth look at the Etesia Attila 51
Cutting Width: 51cm
Dimensions (L x W x H): 181 x 57.5 x 110 cm
Engine HP: 6HP
Amount of Cylinders: 1
Horse Power: 6HP
Fuel: Unleaded fuel 95/98
Fuel Tank Capacity: 2 litres
Wheel Transmission Specification
Transmission Type: Hydraulic
Number of Wheel Drive: 2
Forward Speed (km/h): 5
Reverse Speed (km/h): 3
Working Angle (%): 30
Output (theoretical): 2800 m²/h
Number of Blades: 1
Cutting Width: 51cm
Measurement and Weight Specification