PELLENC Helion 2 Compact Hedge Trimmer
Fast Connector System
On the HELION 2 COMPACT, the Fast Connector allows for rapid connection and disconnection of the tool to and from the battery when working—a key safety element that allows you to quickly get out of any risky or uncomfortable situation.
High performance sharpening
The protector on the HELION 2 COMPACT, easily disassembles for rapid sharpening of the blades.
The handle is adjustable by +/- 90° for vertical work without bending the handle.
A unique device reverses the motor’s direction of rotation if the blade gets caught in the vegetation. This enables it to be easily removed and prevents the blades from twisting or breaking.
Optimised power and battery life
The 4 speeds make it possible to adapt the speed to the type of vegetation. Good management of the selector also saves on battery use.
Robust cutter bar
Composed of light weight and robust materials: The stiffener is in aluminium and the blade is in high carbon steel.
All cutter bars are universal and easily interchangeable. The mounting and removal of the cutter bar takes less than a minute.
PELLENC professional power tools eliminate nearly 99% of direct emissions of greenhouse gases compared with a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are completely eliminated.
NEW: Cutting power designed for pruning and finishing HELION 2 COMPACT.
Anti-locking blades system.
NEW: Fast Connector System: for rapid tool connection and disconnection HELION 2 COMPACT.
Best compromise between vibrations/cutting capacity.
Enough battery life for a full day’s work.
NEW: Waterproofing level of IP 54 HELION 2 COMPACT
Odourless and pollution-free operation.
Zero emissions and zero waste.
Soft Touch rotating handgrip.
Its light weight improves working conditions.
Quick Switch system with four types of interchangeable cutter bars on the same engine.
NEW: Retractable trigger HELION 2 COMPACT
At least €8 in petrol saved per day.
1 motor with different blade sizes.
No use of blended fuel.
|Maximum power – W||1200|
|Combustion engine equivalence – in³||1.83|
|Weight (with a 24.8 in blade) – lbs||7.7|
|Pole length – in||–|
|Cutting rate – cuts/min||3 200 to 3 800|
|Available cutting length – in||10.6 – 20.1 – 24.8 (with/without deflector) – 29.5 in|
|Tooth spacing – in||1.57|
|Tooth height – in||0.95|
|5-notch rotating handle||+/-90°|
|Multi-position pivoting cutting head||–|
|Noise level (LPA)* – dB(A)||84|
|Guaranteed noise level (LWA)* – dB(A)||92|
|Front handle vibration level (ah)** – ft/s²||8.5|
|Rear handle vibration level (ah)** – ft/s²||9.8|
|4-speed selector switch|
|Belt carrying kit||–|
|Harness carrying kit||–|
|Battery life**** with ULiB 1100,||Up to 2 days|