Please note that due to the effect of the current situation on our suppliers and shipping providers there may be delays in your order. We are trying our best to maintain good stock levels but it's not always possible. Please contact us if you wish to check the availability of specific products.

Stay Safe Everyone - Forest Park and Garden Team

STIHL HTA 85 Cordless Telescopic Pole Pruner 30cm/12in (body only) 4857 200 0005

STIHL HTA 85 Cordless Telescopic Pole Pruner 30cm/12in (body only) 4857 200 0005

PELLENC Selion 1.8M Pole Pruner P180

PELLENC Selion 1.8M Pole Pruner P180

PELLENC Selion C21 HD Pruner Chainsaw

Pruning requires specialised knowledge and suitable equipment. PELLENC offers arborists a model that will meet their expectations in terms of weight, balance, manoeuvrability, and power. Equipped with numerous innovations, the new SELION C21 HD pruner has more torque and is the lightest on the market.





£1,110.00 £925.00
Availability: Normally dispatched within 24hrs subject to availability.

4 Innovative safety mechanisms

Kickback sensor with electronic start-up instantly triggers an electric chain brake in the event of a fall or kickback, and is 8 times more sensitive than a petroloperated
chainsaw chain brake.

Tool auto-diagnostic system. SELION checks during first use that the electronic kickback sensor is operational, if this is the case, the machine will operate.

The double-press start-up trigger prevents accidental start-up of the chainsaw.

Low kickback OREGON ® chains: the kickback phenomenon, if it occurs, will be much less violent.

A more efficient motor

The claw

Enables a more solid grip on branches and trunks.


The shape of the magnesium casing offers improved evacuation of swarf, increased solidity and optimal lightness.

Chain brake-electronic switching

The chain brake activates instantly in case of fall or kick-back.

Automatic chain tension

The chain guide is mounted on a spring which allows the chain to tighten automatically.

Electronic management of oil flow

The system adjusts chain lubrication according to the cutting force required.

A folding key is integrated

This wrench retightens the chain and gives quick access to the pin and the chain.

Carbon footprint

PELLENC professional power tools eliminate nearly 99 % of direct emissions of greenhouse gases compared with a combustion engine, namely, 86 times less. And, if you recharge your PELLENC batteries with our Solerion solar charger, CO2 emissions are completely eliminated.


Specifically designed for arborists, for use with the ultra-flat POLY 5 battery.

PELLENC Brushless motor 2,000 W (equivalent to 45 cm3)

New motor for even better performance (increased torque).

New magnesium casing for better chip evacuation.

New guide for constant and optimal chain tension.

Battery life provides a full day of pruning work.


Weighs only 2 kg.

The claw enables a more solid grip on branches and trunks.

Reinforced front hand guard.


At least €7 in petrol saved per day.

Time savings.

Low maintenance.

Up to 30 % less chain oil used


Noise-free operation.

Zero emissions and zero waste.


Max. power – W 2,000
Heat engine equivalence – cm³ 45
Weight – Kg 2
Motor speed – rpm 6,200
Chain speed – m/s 14,5
Guide length – cm/inches 30 / 12’’
Oregon chain: Pitch/Type/Number of links ¼ ’’/ 25AP / 70E
Pinion 11 quarter inch (¼ ‘’) teeth
Tank capacity – cl 25
Noise level (LPA)* – dB(A) 84
Guaranteed noise level (LWA)* – dB(A) 96
Front handle vibration level (ah)** – m/s² 2,8
Peristaltic pump
Automatic chain tensioner
Integrated retractable key
Electronic chain brake
Battery life*** with POLY 5 ULiB Up to 1 day

* Values determined according to the acoustic measurement standards DIN EN ISO 3744:1995 and DIN EN ISO 11201:1996.
** Vibration emission value following DIN EN 60745-2-13:2008 – Kd uncertainty = 1.5 m/s².
*** For information: the times were observed in actual working time, without taking breaks into consideration. Battery life is influenced by the nature of the work required.