Diesel. Done Right.
Our diesel Dingo TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 52.2 L/min and pumping 17.9 kW (24 hp) to the attachments, yet has a ground pressure as low as 0.36 bar (5.2 psi). And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labour. Plus it provides zero radius turn capability for unmatched manoeuvrability.
Exclusive TX Track Drive
Low centre of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tyre ruts and flat tyres.
Up to 34 L/min at 207 bar hydraulic system gives you incredible hydraulic power to auger up to 76 cm holes or trench 91 cm deep.
Liquid-Cooled Diesel Engine
The 18.6 kW (25 hp) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.
You’re up and running in a flash with three easy-to-use controls.
1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand.
2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control.
3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
|Engine||25 HP (18.6 kW) Engine Kubota®|
|Ground Clearance||11.7 cm|
|Ground Pressure||0.36 bar (5.2 psi)|
|Ground Speed||0 to 4.0 mph fwd, 0 to 2 mph rev.|
|Hinge Pin Height||167.1 cm|
|Hydraulic System Pressure||207 bar relief|
|Loader Arm Flow||22.7 L/min Loader|
|Hydraulic System||Joystick control for all funct|
|Operating Capacity||251 kg|
|Reservoir Capacity||40 litres|
|Tip Capacity||716.7 kg|
|Track||15 cm Kevlar reinforced rubber|
|Traction Flow||64 L/min|